User`s manual

100
Answering system
Answering system settings
Answer on/off
If you turn the answering system on, it answers calls and records messages
only on the home line. If your paired cell phone has voicemail, callers can leave
messages with that voicemail service.
If your answering system is turned off and you change any of its settings, the
answering system automatically turns on again.
When the answering system is turned on, the /ANS ON/OFF light on the
telephone base is on. Both the handsets and telephone display ANS ON.
To turn the answering system on or off:
Using a cordless handset:
Press MENU in idle mode.
Press CID or DIR to highlight Answering sys, then press
SELECT.
Press CID or DIR to highlight Answer ON/OFF, then
press SELECT.
Press CID or DIR to highlight On or Off, then press
SELECT to save. You hear a confirmation tone.
Using the telephone base:
Press /ANS ON/OFF to turn the answering system on or off.
When the answering system is turned on, it announces, “Calls
will be answered.” When the answering system is turned off, it
announces, “Calls will not be answered.”
-OR-
Press MENU in idle mode.
Press CID or DIR to highlight Answering sys, then press SELECT.
Press CID or DIR to highlight Answer ON/OFF, then press SELECT.
Press CID or DIR to highlight On or Off, then press SELECT to save. You
hear a confirmation tone.
NOTE: If the answering system is off and there is an incoming call, the system answers after
ten rings and announces, “Please enter your remote access code.” For more information about
remote access, see pages 114-115.
1.
2.
3.
4.
1.
2.
3.
4.
ANSWER ON/OFF
On
Off
BACK SELECT
ANSWERING SYS
Delete all old
Record memo
Answer ON/OFF
BACK SELECT