User manual

Confirmation and Error Tones
Throughout this manual you are told that you will receive a "confirmation" tone after valid key
presses and an “error” tone when key presses are not valid. If you would like to hear the
confirmation and error tones before you start customizing the system, complete the following
exercise:
To hear a confirmation tone:
● Press INTERCOM.
● Lift handset (or press SPEAKER).
● Dial #2.
To hear an error tone:
● Press INTERCOM.
● Lift handset (or press SPEAKER).
● Dial * 0.
● Press MEMORY.
● Dial 28.
How to Use the System-Planner and the Customization Chart
A System Planner is provided on page 8 to guide you in planning how you will customize your
system. Record your decisions on the planner. You may want to use pencil so that you can
make changes in the future. Sample planners are illustrated on pages 18-21, along with the
reasons for the customizing decisions for two fictitious companies. If you are undecided
about what customizing decisions you want to make for your system, reading those examples
may be helpful.
When the System Planner is complete you can start customizing your system. The Customization
Chart on page 9 may be all you will need to complete the customization of your system.
If you wish more detailed instructions, however, read pages 10 through 17.
If you use the Customization Chart on page 9, remember to follow the dotted line path. As
on the System Planner, grey-shaded areas are the system features and green-shaded areas are
the telephone features.
6
Administration Manual