User manual

ManualsBrandsAT&T ManualsComputer equipmentUpgrade and Administration

Customization Chart

SAMPLE ADMINISTRATION OVERLAY

Follow this chart to perform all your customizing duties.

A more detailed set of instructions starts on page 10.

■

To get a different line of features, press ENTER ADMIN (at

●

■

To customize another feature in the same row, press

FEATURE.

■

To leave customization mode, hang up. Replace overlay in pocket.

Don’t forget to turn the administration switch OFF

AT CONTROLLER

when you are finished customizing your system.

■

Light patterns indicate current setting:

OFF is 1

ON is 2

Even Flash is 3

Wink (short on, long off) is 4

TURN ADMINISTRATION SWITCH ON

AT TELEPHONE SET 10

PRESS INTERCOM

LIFT receiver (or press speaker)

DIAL * 0 (Confirmation tone)

INSTALL Administration Overlay

SYSTEM RESET

SYSTEM SPEEDCALL

(to return to Installed settings)

DIAL

CUSTOMIZING THE

SYSTEM

CUSTOMIZING EACH

TELEPHONE

DIAL

All other telephones

must be Idle

CHANGE A NUMBER:

ERASE A NUMBER:

DIAL

09009

All other telephones

must be idle

PRESS STATlON

● Dial telephone number

● Press MEMORY

6-Button Sets DIAL extension number

24-Button Sets PRESS auto-dial button

●

Press MEMORY

● Enter two-digit code of number

to be erased

to be changed

● Listen for confirmation tone

To customize another

● Listen for confirmation tone

Repeat these steps for each

telephone set, press STATION.

Repeat these steps for each telephone

telephone number to be erased.

number to be changed.

Follow any dotted Iine path.

Choose only those features you wish to change.

AUTOMATIC PRIVACY

TOLL CALL CHECK

HELD CALL REMINDER

LINE TYPE

PBX LINE

EXTERNAL ALERT

DIAL TYPE

PRESS FEATURE

Press FEATURE

ACCESS CODES

PRESS FEATURE

PRESS FEATURE PRESS FEATURE

DIAL 1

DIAL 2

DIAL 3

DIAL 4

DIAL 5

DIAL 6

DIAL 7

1 Off

To enter a code:

DIAL—

DIAL— 1 “1” Required †

0 No reminder

PRESS line button(s)

PRESS Iine button(s)

2 On †

1 One minute †

DIAL code

1 Touch Tone

2 “1” Not Required

1 Never

DIAL —

— 1 Unavailable Line

PRESS ADD

2 Night Only †

DIAL — 2 Two minutes

To Drop a code:

DIAL code

DIAL— 3 Day Only

2 Dial Pulse †

3 Three minutes

DIAL —2 Outside Line †

PRESS DROP

3 PBX/Centrex line

4 Always

4 Four minutes

To erase all codes:

PRESS DROP

PRESS *

PRESS DROP

(lnstalled code is 9)

†

lnstalled Setting

LINE USE PERMISSION

PRESS FEATURE

DIAL 1

PRESS line button(s)

1 No Permission

DIAL — 2 Full Permission †

3 Answer Only

AUTOMATIC

LINE SELECTION

PRESS FEATURE

DIAL 2

PRESS Iine button(s)

DIAL —

1 Not Eligible

2 Eligible †

LINE RlNGING

OPTIONS

PRESS FEATURE

DIAL 3

PRESS line button(s)

1 No Ring

DIAL— 2 Normal †

3 Abbreviated

NIGHT RINGING

PRESS FEATURE

DIAL 4

DIAL— 1 Normal Ring

2 Programmed Ring †

OUTSIDE SERVICE

PRESS FEATURE

DIAL 5

1 0utward Restricted

DIAL —2 Unrestricted †

3 Toll Restricted

COPY TO TELEPHONE

PRESS COPY TO

DIAL extension number

24 Button Sets PRESS

auto dial button

COPY TO All

PRESS COPY TO

PRESS *

All other telephones must

4 Delayed

be idle