Specifications

• Speakerphone
• Polyphonic MIDI ringtones
• Infrared port
• External ringer on/silence switch
• Vibrate mode
• Stylus
• Keyguard
• 2.5 mm headset jack supports stereo audio
• customizable side button
Please see the Palm website for additional models at: http://www.palm.com/us/
VII. Setting the HotSync Button control for the PixController.prc Application
Once the PixController software application is installed on your Treo phone you need to setup the HotSync control to run
the PixController application and not the HotSync application. Follow the procedure listed below for either the Treo 600 or
650 HotSync setup procedures.
Treo 600 HotSync Setup
1. Tap on the “Prefs” application. 2. Select the “Buttons” option from the
pull down menu in the upper right hand
corner, then tap the “HotSync…” button
on the bottom.
3. From the pull down menu in the
middle of the screen select the
“PixController” application then tap
on the “OK” button.