Specifications

Alltel CARRIER SMTP
To configure PixController.prc to send email using the Alltel SMTP server, go to your Server Account settings
(Accounts | Edit Accounts | Server). Enter the POP3 settings into the Incoming Server block as per your ISP's
instructions, and enter the following for the Outgoing Mail Server:
SMTP Server: mail.alltel.net
Username: [leave blank]
Password: [leave blank]
T-Mobile (USA) CARRIER SMTP
To configure PixController.prc to send email using T-Mobile's SMTP server account, go to your Server Account
settings (Options -> Email Settings). Enter the POP3 setting as per your ISP's instructions and enter the following
for the Outgoing Mail Server:
SMTP Server: myemail.t-mobile.com
Username: [your T-Mobile phone number followed by :1]
Password: [your T-Mobile password (same as you use for web access to your T-Mobile account)]
If the information above does not work for you, first try leaving the password field blank. Also, an issue may be
caused by recent changes to T-Mobile's services (reported by some users). It appears they may be requiring you
to register with their mail server via their web site. This is not an issue, but it also has to mirror the server that you
POP to in order to get mail. The process is roughly to register with T-mobile, which includes entering your POP
(incoming mail) server and password. Once this is done, you can then use their SMTP server, because you get
an ID and password to enter in for the myemail.t-mobile.com server. Rather than entering the username and
password fields in PixController as it says above, the ID and password received from the registration process
should be used. When a person configures their Treo in this manner, he/she needs to turn off the Alerts option on
the T-mobile web site. If that is not done, text messages which are the same as the email notes are also sent to
the device.