Specifications

Use Scheduler Check Box Option
1. To use the Scheduler check the
“Use Scheduler” box and click on the
“Set Schedules” button.
2. Under the “Scheduler” screen you
can setup any day of the week to
limit when photos are taken on that
day.
Simply select the box of the
week/hours in which you want to limit
when photos are taken.
This option is useful for security
setups when you may not want to
take photos say between 7AM to
4PM Mon-Fri in a jobsite setting.
You can have up to 4 pre-set
schedules by selecting the A-D
buttons at the bottom and save a
“Memo” for each.
When done select the “OK” button.
Multi Photo Shot Mode
1. To setup Multi Photo mode select the number of
photos you wish to take upon each motion trigger
event in the pull down menu under the “On Trigger
Take” menu. If you select to take 2 photos, the first
photo will be taken and sent before the second photo
is taken.
Use Memory Card
1. If you select the “Use Memory Card” box please be sure
to insert a SD memory card into the slot shown above.