Operation Manual

73
Multiple handset use
Push-to-talk (PTT)
Change a one-to-one PTT call to an intercom call
You can convert a one-to-one PTT conversation to an intercom call.
Using a handset:
When your handset displays Press and hold [PTT] to talk, press INTCOM .
Your handset displays Switch to Intercom? Press SELECT to confirm.
Your handset then displays Calling HANDSET Y (Y represents the
destination handset number) or Calling BASE 0. The destination
handset temporarily displays Push to talk Ended and then HANDSET X
is calling (X represents the originating handset number).
On the destination device, press HOME/FLASH or /SPEAKER on the
handset or HOME on the telephone base to answer the intercom call.
Both devices now display Intercom.
To end the intercom call, press OFF/CANCEL, END or place the handset
in the telephone base or charger. Both devices display Intercom ended.
Using the telephone base:
When the telephone base displays Press and hold [PTT] to talk, press
INTCOM . The telephone base displays Switch to Intercom? Press SELECT .
The telephone base then displays Calling HANDSET Y (Y represents
the destination handset number). The destination handset temporarily
displays Push to talk Ended and then BASE 0 is calling.
On the destination handset, press HOME/FLASH or /SPEAKER to
answer the intercom call. Both screens now display Intercom.
To end the intercom call, press CANCEL or END on the telephone base.
Both screens display Intercom ended.
1.
•
2.
3.
1.
•
2.
3.