Operation Manual

ManualsBrandsAT&T ManualsCordless TelephoneTL96471

Multiple handset use

Call transfer using intercom

Use the intercom feature to transfer an outside call to another system

handset or the telephone base.

To transfer an outside call:

Using a handset:

When on an outside call, press OPTION .

Press CID or DIR to highlight Intercom, then

press SELECT .

Your handset displays INTERCOM plus a list of devices.

Press CID or DIR to highlight a destination device

and then press SELECT .

-OR-

Press 0 for BASE 0, 1-9 for handset 1-9, TONE

and 0 for handset 10, TONE and 1 for handset 11,

or TONE and 2 for handset 12.

-OR-

Press TONE and then # (pound key) to call all devices.

The call is automatically put on hold. Your handset displays Calling

HANDSET X, Calling BASE 0 or Calling all devices. The destination device

rings and displays HANDSET X is calling, or HANDSET X is calling all.

To answer the call on the other device, press HOME/FLASH or

/SPEAKER on the handset, or press HOME on the telephone base.

The outside call is still on hold and both devices now show Intercom.

From this intercom call, you have the following options:

You can transfer the call. Press OPTION and then press SELECT to select

Transfer on the calling handset. Your screen shows Call transferred. The

other device automatically connects to the outside call.

You can let the other device join you on the outside call in a 3-way

conversation. Press OPTION , highlight Share call, and press SELECT .

You can end the intercom call and continue the outside call with your

handset. Press

HOME/FLASH or

CELLULAR on your handset.

You can press OFF/CANCEL or END to hang up the intercom call

(the outside call will automatically go off hold and reconnect with

your handset).

NOTES:

If you want to cancel an intercom call and reconnect to the outside call before the

destination handset answers, press OFF/CANCEL or END on the originating handset.

If the other handset does not answer the intercom call within 100 seconds, or if the

other handset is in the directory or caller ID log, or is out of range, the calling handset

shows No answer. Try again. and returns to the outside call.

•

–

•

Transfer

Intercom