Operation Manual

ManualsBrandsAT&T ManualsCordless TelephoneTL96471

Telephone settings

Handset and telephone base settings

Website

You can use this feature to view the AT&T website address.

Press MENU on the handset in idle mode to enter the

main menu.

Use CID or DIR on the handset, or press CID or DIR

on the telephone base to highlight Website, then press

SELECT . The screen shows the AT&T website address.

Press OK to exit.

Home area code

If you dial 7 digits to make a local call (area code not

required), enter your area code into the telephone as the

home area code. When you receive a call from within your

home area code, the caller ID history only displays the

7 digits of the telephone number.

This feature makes it easy for you to place a call from the

caller ID log. If you dial 10 digits to make a local phone call, do not use this

home area code feature. If you do, you cannot place local calls from your

caller ID log, as they will have only 7 digits.

To set the home area code:

Press MENU in idle mode to enter the main menu.

Press CID or DIR on the handset, or press CID or DIR on the

telephone base to highlight Directory, then press SELECT .

Press OPTION to choose Home.

Press CID or DIR on the handset, or press CID or DIR on the

telephone base to highlight Home area code, then press SELECT . The

screen displays Only for 7 digits dialing from Caller ID log.

Use the dialing keys to enter the desired home area code.

Press MUTE/DELETE on the handset, or DELETE/X on the telephone

base to erase a digit.

Press and hold MUTE/DELETE on the handset, or DELETE/X on the

telephone base to erase all digits.

Press CID or DIR to move the cursor to the right or left, or press

CID or DIR on the telephone base to move the cursor to the left or right.

Press SET to save. The handset displays Area code will not show in

Caller ID log. You hear a confirmation tone.

NOTE: If, in the future, your telephone service provider requires you to dial 10 digits to

make a local call (area code + telephone number), you will need to delete your home area

code. With the home area code displayed, press and hold MUTE/DELETE on the handset,

or DELETE/X on the telephone base and then press SET . The home area code is now

restored to its default setting of _ _ _ (empty).

•

HOME AREA CODE

-- -

BACK

SET

www.telephones.

att.com

www.telephones.

att.com