Operation Manual

41
Telephone settings
Handset and telephone base settings
Key tone
The handset is set to beep with each key press. If you turn
off the key tone, there are no beeps when you press keys.
To change the setting:
Press MENU in idle mode to enter the main menu.
Use CID or DIR on the handset, or press CID or
DIR on the telephone base to scroll to Settings, then
press SELECT .
Press CID or DIR on the handset, or press CID or
DIR on the telephone base to scroll to Key tone, then
press SELECT .
Press CID or DIR on the handset, or press CID or
DIR on the telephone base to adjust the key tone
volume. You hear a sample of each volume while
adjusting. Press SET to save your preference.
-OR-
Press OFF to turn off, then press SET to save. You hear
a confirmation tone.
Dial mode
The dial mode is preset to tone dialing. If you have pulse
(rotary) service, you must change the dial mode to pulse
dialing before using the telephone.
To change the setting:
Press MENU in idle mode to enter the main menu.
Press CID or DIR on the handset, or press CID or
DIR on the telephone base to highlight Settings, then
press SELECT .
Press CID or DIR on the handset, or press CID or
DIR on the telephone base to highlight Dial mode,
then press SELECT .
Press CID or DIR on the handset, or press CID or
DIR on the telephone base to choose Tone or Pulse,
then press SET to save. You hear a confirmation tone.
1.
2.
3.
4.
1.
2.
3.
4.
SETTINGS
CID time sync
Rename handset
Key tone
BACK SELECT
SETTINGS
Rename handset
Key tone
Dial mode
BACK SELECT
DIAL MODE
Tone
Pulse
BACK SET
KEY TONE VOLUME
OFF SET
SETTINGS
CID time sync
Rename base
Key tone
BACK SELECT
KEY TONE VOLUME
Active devices
OFF SET
SETTINGS
Rename base
Key tone
Dial mode
BACK SELECT
DIAL MODE
Tone
Pulse
BACK SET