Operation Manual

Parts checklist
Your telephone package contains the following items. Save your sales receipt
and original packaging in the event warranty service is necessary.
Telephone line cord Power adapter for
telephone base
Telephone base
with wall mount
bracket attached
Charger for cordless
handset with power
adapter installed
(1 for TL96271)
(2 for TL96371)
(3 for TL96471)
Batteries for cordless
handsets
(2 for TL96271)
(3 for TL96371)
(4 for TL96471)
Battery compartment
covers
(2 for TL96271)
(3 for TL96371)
(4 for TL96471)
BY 1021
BT183342/BT283342 2.4V 400mAh Ni-MH
Cordless handsets
(2 for TL96271)
(3 for TL96371)
(4 for TL96471)
User’s manual Quick start guide
User’s manual
TL96271/TL96371/TL96471
DECT 6.0 cordless telephone/
answering system with
BLUETOOTH® wireless technology wireless technology
Telephone base and charger installation
This quick start guide provides you with basic instructions only.
For more complete instructions, refer to your user’s manual
provided in the package, or see the online user’s manual at
www.telephones.att.com/manuals.
Quick start guide
TL96271/TL96371/TL96471
Caution: Use only the power adapter provided with this product. To obtain a replacement, visit
our website at www.telephones.att.com or call 1 [phone]. In
Canada, dial 1 [phone].
Raise the
antenna.
Plug the power cord and
the telephone line cord
into the jacks.
Route the power adapter
cord through this slot.
Plug one end of the
telephone line cord
into a telephone
jack or a DSL filter.
A DSL filter (not
included) is required
if you have DSL
high-speed Internet
service.
The DSL filter must
be plugged into the
telephone wall jack.
Route the telephone line
cord through this slot.
Plug the power
adapter into a po wer
outlet not control led
by a wall switch.