Operation Manual

Bluetooth

Bluetooth setup

Add a headset

Before you begin, make sure that your Bluetooth enabled headset is not

connected to any other Bluetooth device. Refer to your headset user's

manual to learn how to search for or add new Bluetooth devices.

To pair and connect a headset:

Press MENU on the telephone base in idle mode to

enter the main menu.

Press CID or DIR to highlight Bluetooth, then press

SELECT .

Press SELECT to choose Add device.

Press CID or DIR to highlight Add headset, then

press SELECT . The screen displays Please wait...

followed by If headset is connected to cell, please

disconnect it.

If there are already 4 paired devices on the device

list, the 4th device on the device list will be

automatically removed, regardless of whether the

new device pairing is successful or not.

If there is another headset already active, the screen

will show Only 1 headset in device list can be

ready for connection and prompts you to replace

an existing paired device.

If there are already 2 active devices on the device

list with prefix D1: or D2:, the screen shows Only 2

devices can be ready for connection. The screen

prompts you too deactivate an active device.

Press NEXT . The screen displays Pls set headset to

discoverable mode. Set your headset to discoverable

mode (refer to the user’s manual of your headset),

then press NEXT .

All devices that are connected to the telephone base

are temporarily disconnected.

The screen displays Searching for Bluetooth headsets...

When the screen displays the found devices, press

CID or DIR to highlight your headset and then press SELECT .

Enter the PIN of your headset. The PIN for most Bluetooth devices is

0000 (refer to the user’s manual of your headset). Then press NEXT .

•

BLUETOOTH

Add device

Device list

Download dir

BACK SELECT