Operation Manual

20
Bluetooth
Bluetooth setup
Your cell phone may require a passcode. In this case
the telephone base displays Check cellular. ENTER
PASS CODE. Enter the cell phone passcode (typically
0000) into the telephone base and press SET to save.
Enter the PIN of the telephone base (the default PIN
is 0000) into your cell phone to continue the pairing
process. The telephone base displays Adding Cell
Phone A to device list...
When a device is successfully connected, the telephone
base displays Cell Phone A is added and connected to base. You hear a
confirmation tone. The corresponding status icon ( 1 or 2) displays. The
corresponding device light on the telephone base (DEVICE 1 or DEVICE 2)
turns on.
If you have trouble pairing your cell phone, it may not be compatible
with your TL96271/TL96371/TL96471. Check the Bluetooth
compatibility list at www.telephones.att.com.
NOTES:
The pairing process may take up to one minute. If the pairing process fails, try again.
The steps for the pairing process may vary for different cell phones. If this happens,
follow the prompts on your cell phone and your TL96271/TL96371/TL96471 to
complete the pairing process.
Refer to the user’s manual of your cell phone on how to search for or add a new
Bluetooth device.
7.
8.
9.
•
•
•
Adding
Cell Phone A
to device
list...
Cell Phone A
is added
and connected
to base.