Operation Manual

16
Getting started
Wall mount to tabletop installation
To change the telephone base from the wall mount position to tabletop
position, follow the steps below.
If the telephone line cord and power adapter cord are bundled, untie
them first.
Push the telephone base up to remove it from wall. Unplug the telephone
line cord (or DSL filter) from the wall. Unplug the power adapter from the
power outlet.
Gently pull upward to release the wall mount bracket. Rotate the wall
mount bracket up to tabletop position and push it into the telephone base
until it clicks into place.
See Telephone base installation on page 11.
1.
2.
3.
4.
Installation options
Slide the telephone base down until it locks securely.
Bundle the telephone line cord and power adapter
cord neatly with twist ties.
5.