Operation Manual

112
Answering system
Message playback
If you have both new and old messages, you can play either new or old
messages. The caller ID information displays on the screens when you play
messages and you can call back the caller.
When playback begins, the handset and telephone base screens display the
message status, caller ID information, and time and date of the message
recorded. You hear the total number of messages followed by the day and
time of the message. After the last message, the telephone announces, “End
of messages.” and the screen displays End of messages.
To listen to messages with the telephone base:
Press /PLAY/STOP to listen to messages. If you have either new or old
messages, the messages play automatically. If you have both new and
old messages:
To play new messages, press /PLAY/STOP or SELECT to select
Play new msgs.
To play old messages, press CID or DIR to highlight Play old msgs,
then press /PLAY/STOP or SELECT .
-OR-
Press MENU in idle mode.
Press SELECT to select Play messages. If you have either new or old
messages, the messages play automatically. If you have both new and
old messages:
To play new messages, press SELECT to select Play new msgs.
To play old messages, press CID or DIR to highlight Play old msgs,
then press SELECT .
When the handset is playing a message, its screen shows [2]-Call info and
the caller’s name or number. If the caller’s information is unavailable, the
handset shows No caller info.
Options during playback:
Press VOLUME to adjust the speaker volume.
Press /SKIP or SKIP to skip to the next message.
Press /REPEAT or REPEAT to repeat the message currently playing.
Press /REPEAT or REPEAT twice to listen to the previous message.
Press DELETE/X to delete the current message. The system advances
to the next message.
Press 2 to pause the playback and show the caller ID information.
Press HOME or DIAL to use the home line, or press CELLULAR
to use the cell line to call back the caller. If necessary, press #
(pound key) or 1 to show different dialing options.
Press CANCEL or BACK to restart the playback. If you do not call
back within 10 seconds, message playback restarts.
Press HOME or CELLULAR to pause the message playback.
The telephone base screen displays Call back? with the caller ID
information. Press YES to call back the caller, or NO to restart the
message playback. If the dialing format used is not correct, then use
the option above to choose the correct dialing format before calling
back the caller.
Press /PLAY/STOP or CANCEL to stop.
•
•
•
1.
2.
•
•
•
•
•
•
•
–
–
–
•