Operation Manual

98
Caller ID
Caller ID operation
Using the telephone base:
Select a desired entry in the caller ID log (see Review the caller ID log on
page 95).
When the desired entry appears, press # (pound key) repeatedly to show
different dialing options.
When the number is in the correct format, press SAVE . The telephone base
shows EDIT NUMBER.
Use the dialing keys to edit the number.
Press DELETE/X to erase a digit.
Press and hold DELETE/X to erase all digits.
Press CID or DIR to move the cursor to the right or left.
Press and hold REDIAL/PAUSE to insert a dialing pause (a p appears).
Press NEXT .
Press CID or DIR to highlight one of the following types:
Home
Cell
Work
Other
Press NEXT . The telephone base displays EDIT NAME.
Use the dialing keys (see page 79) to edit the name.
Press DELETE/X to erase a character.
Press and hold DELETE/X to erase all characters.
Press CID or DIR to move the cursor to the left or right.
Press TONE to toggle the name order. For example, Robert Brown
becomes Brown Robert when you press TONE .
Press SAVE to confirm and the telephone base shows Saved. You hear a
confirmation tone.
NOTES:
If the caller’s name you received from the telephone service provider is in all capital
letters, the first letter of every word remains a capital letter, while other letters become
lowercase. However, the next letter after the prefix “Mac”, “Mc”, “D’”, “C’” or “O’”, is
kept as a capital letter. For example, the “D” in “MacDonald” is kept as a capital letter.
Another exception is that “VAN DER” will be changed to “Van der”.
When you try to save a caller ID entry without any caller ID information, the screen
displays Unable to save.
When you try to save a number already stored in the directory, the screen shows
Already saved.
1.
2.
3.
4.
•
•
•
•
5.
6.
•
•
•
•
7.
8.
•
•
•
•
9.
•
•
•