Operation Manual

31
Handset and telephone base settings
Ringer volume
You can select the ringer volume for incoming calls on the home line and
the cell line.
To adjust the ringer volume:
Press VOLUME on the telephone base to set the
ringer volume while the telephone base is in idle mode to
set the ringer volume for all lines.
Press SET to confirm and you hear a confirmation tone.
-OR-
Press OFF to turn off the ringer, then press SET to save.
You hear a confirmation tone.
-OR-
Press MENU in idle mode to enter the main menu.
Press CID or DIR on handset, or press CID or
DIR on the telephone base to highlight Ringers, then
press SELECT .
Press SELECT to choose Ringer volume.
Press CID or DIR on handset, or press CID or DIR
on the telephone base to highlight All lines, Home,
Cell-D1 or Cell-D2, then press SELECT to confirm.
Press CID or DIR on handset, or press CID or DIR
on the telephone base to adjust the ringer volume. A
sample of each ringer volume plays as you scroll through
the choices.
-OR-
Press OFF to turn off the ringer. The handset displays
Ringer off.
Press SET to confirm, the screen displays Caller ID won’t
be announced. You hear a confirmation tone.
NOTES:
Changing the handset ringer volume does not affect base
ringer volume.
When the ringer volume for all calls (home and cellular) is set
to off, a steady ringer off icon appears. When only one or
two of the ringer volume settings are set to off, a ringer off
icon flashes.
The ringer volume level also determines the ringer levels of
intercom calls (page 62).
For the handsets that support caller ID announce, when the ringer is set to off, caller ID
will not be announced and the screen displays Caller ID won’t be announced.
1.
2.
1.
2.
3.
4.
5.
6.
•
•
•
•
Telephone settings
RINGERS
Ringer volume
Ringer tone
BACK SELECT
RINGER VOLUME
All lines
Home
Cell-D1
BACK SELECT
RINGER VOLUME
OFF SET
RINGERS
Ringer volume
Ringer tone
BACK SELECT
RINGER VOLUME
All lines
Home
Cell-D1
BACK SELECT
RINGER VOLUME
Active devices
OFF SET