Manual

Getting started
5
Getting started Getting started
Charger installation
Install the charger, as shown below.
IMPORTANT INFORMATION:
Use only the power adapter(s) provided with this product. To obtain a
replacement, visit our website at www.telephones.att.com or call
1 [phone]. In Canada, dial 1 [phone].
The power adapters are intended for a vertical or floor mount position. The
prongs are not designed to hold the plug in place if it is plugged into a ceiling,
under-the-table or cabinet outlet.
•
•
Plug the power adapter into an electrical outlet
not controlled by a wall switch.