Manual

Getting started
7
Getting started Getting started
E
HA
UT
MH)
S.
S.
CR1349
Step 2
Align the cover flat against the battery compartment, and then
slide it upwards until it clicks into place.
Step 3
Charge the handset by placing it face forward in
the charger. The CHARGE light on the top of the
handset is on during charging.
Battery installation and charging
After you install your telephone or power returns following a
power outage, the handset will prompt you to set the date and
time. For instructions, see Set date and time in the telephone
system user’s manual for details. To skip setting the date and time,
press OFF/CANCEL or BACK.
IMPORTANT INFORMATION:
Use only the supplied rechargeable battery or replacement battery
(model BT183342/BT283342). To order, visit our website at
www.telephones.att.com or call 1 [phone].
In Canada, dial 1 [phone]. For more detailed instructions,
refer to the online Complete user’s manual at
www.telephones.att.com/manuals.
If you do not use the handset for a long time, disconnect and remove the
battery to prevent possible leakage.
•
•
CHARGE light