User`s manual

Getting started
2
Charger installation
Install the speakerphone charger as shown below.
Plug the small end of the
charger power adapter into
the power adapter jack on the
back of the charger.
Plug the large end of the
charger power adapter into a
power outlet not controlled by
a wall switch.
Route the power adapter cord
through this slot.
IMPORTANT INFORMATION
• Use only the power adapter provided with this product. To obtain aUse only the power adapter provided with this product. To obtain a
replacement, visit our website at www.telephones.att.com or
call 1 [phone]. In Canada, dial 1 [phone].
• The power adapter is intended to be correctly oriented in a vertical orThe power adapter is intended to be correctly oriented in a vertical or
floor mount position. The prongs are not designed to hold the plug in
place if it is plugged into a ceiling, under-the-table or cabinet outlet.