User`s manual

27
Getting started
Adding and registering a headset
Registration options
The TL7612 headset comes pre-registered to the headset base.
There are two registration options, as described below.
Option 1: The TL7612 supports up to two cordless headsets. You
can rregister a TL7600 (purchased separately) headset or
a previously deregistered TL7600/TL7612 headset to your
TL7612 headset base (see page 28).
Option 2: You can deregister your TL7612 headset (see(see page
30) and then register it to an AT&T DECT 6.0 cordlessregister it to an AT&T DECT 6.0 cordlessAT&T DECT 6.0 cordless
telephone (see page 29). You can register a maximum ofYou can register a maximum of
two headsets (TL7612/TL7600) to a cordless telephone.
The telephone base recognizes and counts a headset
the same as a handset. When you register the headset
to an AT&T DECT 6.0 cordless telephone, the headset
base acts only as a charger for the headset. The LIFTER
AUDIO ADJUST, VOLUME / and MODE controls on
the headset base become inactive. You can place the
headset base anywhere you have an available power
outlet. Do not plug in the telephone line cord; you only
need to plug the headset base into a power outlet.
Refer to your telephone user's manual for the
maximum number of handsets that you can register
to the telephone base. If you have the maximum
number of handsets registered, you need to follow the
deregistration information in your user's manual.
Visit www.telephones.att.com/headsets for a
list of compatible cordless telephones.
You can only register the headset to one product at a time, so
the headset must be deregistered before registering to a headset
base or a cordless telephone (see page 30).
The first headset provided with your TL7612 has a blue ON/OFF
light. When you register a second headset, the ON/OFF light of
the headset turns orange to help you identify the headsets.