User`s manual

Answer a PTT call
1. When you hear two beeps, the screen displays PTT from: X:Handset X
(X represents the extension number [1-0], Handset X represents the
handset name).
2. Press INT to convert the call into a normal intercom call with that
extension.
-OR-
Respond with a new PTT call. Wait for the end of the three-second
PTT wait state (the screen changes to idle mode). To respond with the
telephone base, see PTT to a single handset or PTT to all handsets on
the previous page. To respond with a handset, see Answer a PTT call in
the SynJ SB67108 handset manual.
NOTE: If the PTT call is sent to all handsets, the intercom call is established with the first one
who presses INT.
Convert a PTT call to intercom call
You can convert the PTT call to a two-way intercom call on the called
telephone base.
1. Press INT on the called extension to convert the call to a two-way
intercom call.
2. Optionally, put the corded handset on the telephone base or press
SPEAKER to end the intercom.
End a PTT call
Press EXIT to end the incoming PTT call. •
Telephone base operation
Push to talk (PTT) intercom
54