User`s manual

If you start to record a piece of new music from an audio device but there is no audio device
connected, No device is connected to the headset jack at base. displays on the screen. Please
check the connection on the telephone base and the audio device.
If there is silence detected for six seconds while recording, the screen display automatically returns
to the previous menu. That means the recording was unsuccessful. The M.O.H. default music plays
when calls are on hold until you successfully record new music or a message.
If you fail to record a message, try speaking louder into the corded handset or playing the volume
louder on your audio device. If you are using the audio cable, ensure that it is fully plugged into the
HEADSET/AUX IN jack.
Delete your recording to use default music:
If M.O.H. is turned on and you do not record your own audio, the default
music will play. In order to delete your recorded audio and return to the
default music, you must record six seconds of silence.
1. Follow steps 1-5 of Recording music or a message using
an audio device on page 23.
2. Unplug any audio device that is connected to the
HEADSET/AUX IN jack from the telephone base.
3. Press MENU/ENTER to start recording. After recording six
seconds of silence, your recorded audio is deleted and
the display automatically returns to the previous menu.
To exit without making changes, press EXIT.
2.
3.
4.
24
Getting started
Telephone base setup
M.O.H. record
00:06
ENTER=Stop
M.O.H. record
ENTER=Start