User`s manual

Display
71
[SELECT] =
Enter Data
[SELECT] =
Enter Data
[AWAY] = Down
1 5;tDyz D;S 2 1
[SELECT] = Enter Data
1 512 ENTERED 2 1
[NIGHT] = Sideways
1512
[NIGHT] = Sideways
Comments
***CHANGE DESCRIPTION FOR SENSOR
#2
-ENTER FUNCTION asks where (which Fn#) you wish to go. You
enter 511 because that lets you select which sensor number (2)
to begin with.
-Use SELECT to enter the data.
-Press 2 for sensor number 2.
-The top line shows where you are (you have moved to sensor 2).
The second line confirms that the previous data was entered
successfully.-The AWAY key moves you “down” to
Fn#512.
Fn# 512 asks for sensor 2’s description. Enter per Figure 3-1.
Using the sensor number in the description helps in trouble-
shooting.
-This screen shows the location and verifies that the data was
entered.
**CHANGE DESCRIPTION FOR SENSOR NUMBER 4
-NIGHT allows you to move “sideways” to the next sensor
number.
-The sensor number has changed.
[SELECT] = Enter Data
-Key in your description for sensor 4.
1 512 ENTERED 4 1
[AWA Y ] = Down
I
513 TYPE
4
I
[AWAY] = Down
-The display verifies it is entered
***CHANGE SENSOR NUMBER 4 TO PRIORITY
-Move “down” to Fn# 513.
-Fn#513 asks which Type, but you want to skip past it to Fn#514.
(
.
.-
Figure 3-4Moving Through the Grid
3-6 AT&T Security System 8300 Installer’s Manual