User`s manual

.
Make a copy of this
figure and place it on
the keypad while
programming, as a
ENTER THE DATA
reminder of the key
functions.
ENTER THE DATA, AND MOVE DOWN
ENTER THE DATA, AND MOVE RIGHT
Figure 3-3 Keypad Button Functions
Example:
Moving Through the Grid
Refer to Figure 3-2 and 3-3 for this example,
which shows how to move freely through the
Function Number GRID, and tell the CCU what the
system is like. Assume you are at the ENTER
FUNCTION prompt (the beginning) and want to
make a few changes in the sensor data. The
changes are to the Description
(Fn#512) for
sensors 2 and 4; make sensor 4 a priority device,
and then change the supervision status of sensor
707. Note in the example that we have underlined
characters in the display to show when they
change from the previous display. We have used
bold characters for the characters you enter from
the keypad.
NOTE:
When you go to a Function Number
(Fn#512, a
Point of Protection description, for example) the
second display line will show the current/default
contents of that Fn# (“sensor 12” for example).
Entering your data will overwrite the existing data
as soon as you press the SELECT button.
c
AT&T Security System 8300 Installer’s Manual
3-5