User guide

Placing Calls (Contd)

• Dial tone is supplied.

3. Continue to place the call in the normal way.

Placing an Outside Call for an Inside Party and Calling the

Party Back When the Connection is Ready

1. Place the outside trunk call in the normal way.

2. When the called outside party answers, announce the

call and then press <START> to split the call (put it

on temporary hold).

• New dial tone is supplied on the same <LOOP>

button.

3. Place a call to the inside party who requested the call.

4. Press <RELEASE> to connect the two parties and

remove the call from the console.

(If your console has

the Auto Release feature, hanging up or pressing a

new <LOOP> button has the same result. )

● You are now free to handle other calls.

Typical Display for an Inside Call:

The display shows the PDC and name of the called party.

The digit 3 indicates that three calls are waiting in the queue

to be answered.

2187 Davis,R 3

Continued