User guide

Extending Calls (Contd)

If you are extending an inside party to an outside

trunk, press <START> and dial the call from the SLAC.

3. Wait for the called party to answer.

Notes:

• If the called station rings but does not answer,

pressing <CANCEL> drops the call and

reconnects you to the caller.

• Calls to inside stations only.

If the called

number is busy, you can press <CANCEL> and

return to the caller or you can activate Camp-On

as previously described. (Remember, if you use

Camp-On, you cannot announce the call.)

4. Announce the call

• After the called party answers, but before you

press any more buttons to connect the parties,

you can switch back and forth between the

calling party (the “source”) and the called party

(the “destination”) by using the <SOURCE> and

<DEST> buttons.

Pressing <SOURCE> splits you from the

destination and connects you to the source.

— The light next to the <SOURCE> button

turns off.

— The light next to the <DEST> button

winks.

Pressing <DEST> splits you from the source and

connects you to the destination.

— The light next to the <SOURCE> button

winks.

Continued