User guide

Support Information (Contd)

The Selector Console lights can also provide you with other

information about activity at system stations:

• A call parked at a Call Park DXS button will cause the

associated light to turn on steadily.

• Any call from an inside station to the console is

indicated by a flashing DXS light; however, incoming

call information is presented in a much more

convenient form by the console display, which is

described next.

Call Information Display

The console’s built-in display provides visual data about

incoming and outgoing calls. The display can present two

different screens of information in the window at the top of

the console. Screen 1 appears automatically and contains

primary call data such as the following:

• Extension numbers and names of inside parties

• Trunk identification for calls from outside

• Digits dialed on outgoing trunk calls

• Called party identification on coverage calls

• Number of calls waiting to be serviced.

To see Screen 2, you must press the <SCROLL> button.

Screen 2 contains secondary information such as the source

of a coverage call and the reason it was redirected. Screen

2 is also useful when you are in the process of extending an

incoming call and want to see both calling and called party

data. If Screen 2 does not appear when you press

<SCROLL>, it has no information available for viewing.

Continued