User`s manual

54
Caller ID
Caller ID operation
Save a call log entry to the directory
When in the call log, press DIR or CID to browse to the entry
you wish to save.
Press the Edit softkey to select the displayed entry. Enter phone #: displays.
Use the dialing keys to edit the number.
Press OFF/CLEAR on the handset to backspace and delete characters.
Press and hold OFF/CLEAR on the handset to delete all characters.
Press or to move the cursor to the left or right.
Press REDIAL/PAUSE to enter a three-and-a-half second dialing
pause (see page 43).
Press the Flash softkey to enter a flash (see page 44).
4. Press MENU/ENTER to move to the name. Enter name: displays.
Use the dial pad keys to add characters (see page 43).
Press OFF/CLEAR on the handset to backspace and delete characters.
Press and hold OFF/CLEAR on the handset to delete all characters.
5. Press MENU/ENTER to save the new directory entry. There is a
confirmation tone. To exit without making changes, press OFF/CLEAR.
NOTE: You will need to change how a caller ID number is dialed if the entrydialed if the entry if the entry
does not appear in the correct format. Caller ID numbers might appear with an
area code that might not be necessary for local calls, or without a 1 that might
be necessary for long distance calls (see Make a call log entry ready to dial on
page 52).
1.
2.
3.
•
•
•
•
•
•
•
•