User`s manual

9
Getting started
Add and register handsets
To register a handset to your SynJ SB67138/SB67158 telephone base
1. Make sure the handset is out of the charger and the
screen shows Press MENU on BS, sel Registration
& sel Register HS. Then put HS in cradle. before
you begin registration.
2. On the telephone base, press MENU/ENTER.
3. Scroll down to Registration and press MENU/ENTER.
4. Press MENU/ENTER again to select Register HS.
The telephone base screen shows
Registering new device...
5. Place the unregistered handset into the charger.
The handset beeps once and begins registering
to the telephone base. It takes up toIt takes up to 60 seconds
to complete the registration. There is a beep
sound when the registration is successful. The
telephone base shows Handset registered
and then the handset shows X:Handset X (X
represents the handset number [1-0]; Handset X
represents the handset name).
NOTES:
If the registration is not successful, the telephone base screen displays
Registration failed with an error tone. To reset the handset, remove the handset
from the cradle. Try the registration process again.
Please make sure to remove all unregistered system handsets or cordless
headsets from the chargers before registering a new handset.
•
•
COVM
Speed dial setup
Customer support
Registration
>
Register HS
Deregistration
>
Registering
new device...
Handset
registered
2:Handset 2
Set date & time
Charging