User`s guide

Settings 95
Synapse User’s Guide
Using Do Not Disturb (DND)
Do Not Disturb silences incoming ringing and paging. Incoming calls can still be answered as long as the Call Appearance LED is
flashing.
 To enable or disable Do Not Disturb:
Figure 92. Idle Screen
Figure 93. DND Confirmation
1. From the Idle screen shown in Figure 92,
press . (If necessary, press
to display and press .) The DND
Settings screen shown in Figure 93 displays.
2. Press to save changes.
appears in the top right of the display, as
shown in Figure 94.
OR
Press to return to Idle mode at any
time.
3. Press to turn DND off. disappears from the top right of the display.
DNDDNDDND CallFw d Page Mor e 1/ 2
Quick
Dial
12:30PM Thu Feb 23 2008
2 New Missed Calls
5 New Messages
Press or to move highlight, then
press
SELECT
.
EXT 249
John Smith
Quick
Dial
DND - Do Not Disturb
[ON]
DND Settings
Conf ir m
When DND is on, all incoming calls w ill
be sent to your Call Fw d-No Answ er
destination.
Canc el
CallFw d Pa ge Mor e 1/2
Quick
Dial
12:30PM Thu Feb 23 2008
2 New Missed Calls
5 New Messages
Press or to mov e highlight,
then press
SELECT
.
EXT 249
John Smith
DND ON
Figure 94. DND Set
The DND indicator only displays in the top right of the display when Call
Forward All is disabled. When Call Forward All is set, no calls ring regardless
of the DND setting, so the DND indicator does not appear.