User`s guide
Settings 90
Synapse User’s Guide
[Handset, Headset] Deregistering a Cordless Accessory
You must deregister cordless accessories before you can register them to different Desksets. If you remove a Deskset from the
system, first deregister any cordless accessories.
To deregister a cordless accessory:
Figure 83. Handset Registered
Figure 84. Registration
Confirmation
1. Press MENU, then 2, and then 6 to display the Cordless Settings menu shown in
Figure 77 on page 87.
The following procedure describes deregistering the Cordless Handset. The
process is identical for the Cordless Headset, except in Step 2, you press 2, rather
than 1 to deregister the Cordless Headset.
2. Press 1 to display the Cordless Handset Registration menu shown in Figure 83.
3. Press . The confirmation message
shown in Figure 84 displays.
4. Press to confirm deregistration.
The Deskset screen then displays Cordless
Handset is currently Not Registered, as
shown in Figure 85. The REGISTER screen
appears on the Cordless Handset, as shown
in Figure 79 on page 87. The Cordless
Headset ON/OFF
light slowly flashes.
5. Press . The Cordless Settings menu
displays.
Quick
Dial
Cordless Handset Registration
Cordless Handset is currently
Registered.
Ex itDeReg
Press DeReg to deregister the Cordless
Handset.
Press Yes to deregister or No to cancel.
Cordless Handset Registration
Yes No
Are you sure you want to
deregister the Cordless
Handset?
Quick
Dial
Cordless Handset Registration
Cordless Handset is currently
Not Registered
.
Register Ex it
Place Cordless Handset in charger.
Press
Register
to begin process.
Figure 85. Handset Not
Registered