User`s guide

Settings 89
Synapse User’s Guide
[Headset] Registering an Optional Cordless Headset
You can register only one AT&T SB67040 Cordless Handset and only one AT&T TL7600 Cordless Headset to a Deskset, and up to
five Desksets can have cordless accessories. When a Deskset has cordless accessories, they are all part of the same extension,
and only one device can be used at a time.
 To register the TL7600 Cordless Headset:
Figure 82. Cordless Headset Not
Registered
1. Press MENU, then 2, and then 6 to display the Cordless Settings menu shown in
Figure 77 on page 87.
2. Press 2 to display the Cordless Headset Registration screen shown in Figure 82.
3. Press . Registration in Progress... appears while the Deskset searches
for the Handset.
4. When registration is complete, Cordless Headset is currently Registered
displays and the Cordless Headset ON/OFF
light turns solid blue.
5. Press . The Cordless Settings menu displays.
Quick
Dial
Cordless Headset Registration
Cordless Headset is currently
Not Registered
.
Register Ex it
Place Cordless Handset in charger.
Press
Register
to begin process.
The Headset must be in the charger, otherwise registration cannot proceed.
Even if the Cordless Headset has been in its charger, remove and replace the
Cordless Headset right before you press on the Deskset.
Registration can be terminated by pressing CANCEL on the Deskset.
If the Cordless Handset is registered to another Deskset, it must be
deregistered first. See “[Handset, Headset] Deregistering a Cordless
Accessory” on page 90.