User`s guide

Settings 87

Synapse User’s Guide

[Handset] Registering an Optional Cordless Handset

You can register only one AT&T SB67040 Cordless Handset and only one AT&T TL7600 Cordless Headset to a Deskset, and up to

five Desksets can have cordless accessories. When a Deskset has cordless accessories, they are all part of the same extension,

and only one device can be used at a time.

 To register the SB67040 Cordless Handset:

Figure 77. Cordless Settings

Figure 78. Handset Not Registered

1. Press MENU, then 2, and then 6 to display the Cordless Settings menu shown in

Figure 77.

2. Press 1 to display the Cordless Handset Registration screen shown in Figure 78.

3. Prepare the Cordless Handset to be registered. The

Handset must be in the charger with the REGISTER

screen displayed, as shown in Figure 79. Even if the

Cordless Handset has been in its charger, remove

and replace the Cordless Handset right before you

press on the Deskset.

Quick

Dial

1. Handset

2. Headset

(Not Registered)

Cordless Settings

(Not Registered)

Use or to scroll then press

SELECT or press 1 - 2.

Press SELECT to register or

deregister the cordless device.

Quick

Dial

Cordless Handset Registration

Cordless Handset is currently

Not Registered.

Place Cordless Handset in charger.

Press Register to begin process.

12:00a Jan. 0012:00a Jan. 00

To register Handset:

1. Go to your

Deskset.

2. Press MENU.

3. Select User

1/3

Figure 79. Handset Not

Registered

It does not matter which device starts the

registration process.