User`s guide

Overview 40
Synapse User’s Guide
[Handset] Using the Cordless Handset Speakerphone
When the speakerphone is active, the SPEAKER hard key is lit. In Idle or Dial mode, this hard key behaves like PHONE, except
that audio is from the speakerphone.
 To use the speakerphone:
Figure 20. Speakerphone
 To initiate a call, press SPEAKER. The key becomes lit, you hear a dial tone, and the
screen shown in Figure 20 displays. You can dial.
 To end a call, press OFF. Pressing SPEAKER does not hang up calls. The key backlight
goes out and the Idle screen shown in Figure 19 on page 35 displays.
 During an active call, pressing SPEAKER switches audio between the Handset and the
speakerphone.
12:30p Feb 23
Graham Bell
1-9-232-555-0176
00:56 ON A CALL
XFER CONF