User`s guide
Troubleshooting 304
Synapse User’s Guide
There may be a problem with
the connection between the
FXS port and the OHP
system.
Verify the connection between the FXS port and your OHP
system.
See “[ATA] Overhead Paging Overview” in the
Synapse Administrator’s Guide at
www.telephones.att.com/
synapseguides for background and for
configuration instructions.
Multi-zone OHP is not
working and the FXS LED
(right of the ATA LCD screen)
for the FXS port that is used
for the OHP equipment is
OFF.
No signal is detected.
There is no signal when no one is paging.
Verify that your paging equipment is connected to FXS 1
or FXS 2. If not, connect it, and check your OHP
equipment connections.
Symptom Probable Cause Corrective Action ATA OHP Troubleshooting