User`s guide

Troubleshooting 297
Synapse User’s Guide
Single-zone OHP on AUX
OUT is not working and the
AUX OUT LED (right of the
ATA LCD screen) is flashing
GREEN.
Paging is active (a user on
the system is paging the
OHP system). There may be a
problem with the paging
equipment or its setup.
 Verify your paging equipment configuration. Check to see
if the OHP system has settings that need to be adjusted
to work with Synapse. Refer to your paging equipment
documentation or to your installer.
In single-zone paging, paging
starts on Desksets before the
paging starts on the OHP
system.
Paging delay is too short. 1. As administrator, log into the WebUI.
2. Click System Settings –> Overhead Paging.
3. Verify that the Paging Delay is set to an appropriate
delay to work with your OHP system.
4. Click .
Symptom Probable Cause Corrective Action ATA OHP Troubleshooting