User`s guide
Paging 234
Synapse User’s Guide
[ATA] Single-Zone Overhead Paging
If your Synapse system includes an optional single-zone overhead paging (OHP) system, your System Administrator may have set
up an overhead paging option in the paging zones list, such as for your warehouse. The OHP speakers are included when you
page All Extensions, and they may be included in other paging zones.
To page using a single-zone overhead paging system:
Figure 322. Overhead Paging Zone
Figure 323. Paging
1. From Idle or from a held call, press , as shown in Figure 319 on page 232.
It may be necessary to first press from Idle, or to press , then
from Hold.
The paging zones screen displays, as shown in Figure 322.
2. Select the appropriate zone.
3. Press . The system displays the Page screen, as shown in Figure 323.
4. Wait for feedback from your paging system, then speak into the speakerphone or
pick up the corded handset to speak.
5. When finished, press , hang up the handset, or press SPEAKER. You return
to the Idle screen.
Start
Paging Zones
Quick
Dial
1. All Extensions
2. Accounts
3. Design
4. Documentation
5. Management
6. Warehouse
Use or to scroll then press
SELECT or press digit.
EndPage
Page
Press EndPage when done.
Paging Warehouse