User`s guide

Paging 232
Synapse User’s Guide
Paging
If your system administrator has set up paging zones, you can page all extensions or a zone.
 To page all extensions or a paging zone:
Figure 319. Idle Screen
Figure 320. Paging Zones
1. From Idle or from a held call, press , as shown in Figure 319. It may be
necessary to first press from Idle, or to press , then from
Hold.
The paging zones screen displays, as shown in Figure 320.
2. Select All Extensions or a paging zone.
3. Press . The system emits a short paging tone and displays the Page
screen, as shown in Figure 321 on page 233.
4. Speak into the speakerphone or pick up the corded handset to speak.
5. When finished, press , hang up the handset, or press SPEAKER. You return
to the Idle screen.
DNDDNDDND CallFw d Page Mor e 1/ 2
Quick
Dial
12:30PM Thu Feb 23 2008
2 New Missed Calls
5 New Messages
Press or to move highlight, then
press
SELECT
.
EXT 249
John Smith
Use or to scroll then press
SELECT or press digit.
Start
Paging Zones
Quick
Dial
1. All Extensions
2. Accounts
3. Design
4. Documentation
5. Management