User`s guide

Outgoing Calls 184
Synapse User’s Guide
Predialing
Predial is only available when the Deskset is idle or when all calls are on hold. In Predial mode, there is no dial tone. You can
only predial one phone number at a time. To begin Predial, press a Dial-Pad key.
 To make a Predial call:
Figure 245. Predial Number
Figure 246. Active Call
1. Enter the phone number (For example: 9–1–232–555–0176) using the dial pad,
as shown in Figure 245.
The following options are available:
 Press to store the number in your Personal list.
 Press to delete the last digit entered.
 Press to insert a two-second pause into the phone number.
 Press CANCEL to cancel predial.
2. Lift the corded handset, or press SPEAKER, HEADSET, , or the Call
Appearance key associated with the predial number to go off hook and call the
number, as shown in Figure 246.
To do this with the Cordless Handset, see “[Handset] Predialing” on page 189.
Transfer
Quick
Dial
12:30PM Thu Feb 23 2008
9-1-232-555-01
BackspcStore
To call, lif t receiv er, or press SPEAKER,
HEADSET, or key next to icon.
Call Pa us e
Transfer
Quick
Dial
12:30PM Thu Feb 23 2008
9-1-232-555-0176 2:01
Transfer Conf Pa r k Mor e 1 /3
For outside calls, first dial 9. The hyphens appear automatically.
When you are in Predial mode, the Call Appearance highlight bar does not
appear. Once the call becomes active, the highlight bar displays.
When you predial more digits than can be displayed, the digits move to the
left so that the most recently dialed digits can be seen. Three dots appear to
indicate that the earliest digits are no longer visible.