User`s guide

Call Log 178
Synapse User’s Guide
[Handset] Reviewing the Call Log
 To review and dial from the Call Log:
Figure 238. Call Log
1. From the Idle screen, press to display the screen shown in Figure 238.
OR
To access the Call Log when the phone is not idle, press OPTIONS and then scroll down
to Call Log and press SELECT.
2. Press the or Navigation key to scroll to the desired Call Log entry.
3. You have the following options:
 Press SELECT or PHONE to dial out the selected (highlighted) number in the Call Log.
If you are accessing the Call Log from Idle mode, pressing SPEAKER also dials out the
selected number.
Call Log entries may not be in the proper format for dialing. In some areas, you need
to remove the area code or add or remove a 1. Press the or Navigation key to step
through the dialing options. The options are in a circular list, so if you press the
Navigation key when the last option is visible, you return to the first option. The
following dial options are available:
z nnn–nnnn (7 digits)
z 1–nnn–nnnn (8 digits)
z nnn–nnn–nnnn (10 digits)
z 1–nnn–nnn–nnnn (11 digits).
 Press to delete the selected entry.
To do this with the Deskset, see “Reviewing the Call Log List” on page 169.
Mary Williams 10:01a
UNKNOWN ... Jan. 14
CALL LOG
Graham Bell
232-555-0176
NEW
Feb 23 9:55a
1/7
EXITDELETE