User`s guide

Accessing Items in Lists 118
Synapse User’s Guide
[Handset] Accessing the Voicemail List
 To access a phone number from Voicemail:
Figure 129. Enter Password
Figure 130. Voicemail
Message
1. From the Idle screen, press .
If necessary, use the dial pad to enter your user password (if you have created one). Press
SELECT, as shown in Figure 129.
The Voicemail Message Review screen displays, as shown in Figure 130.
2. Press the or Navigation key until the desired entry is visible.
For more information about this feature, see “Reviewing Voicemail records:” on page 161.
To do this with the Deskset, see “To access an entry from Voicemail:” on page 105.
ENTER PASSWORD
Enter passw ord:
CANCELBCKSPC
Press SELECT when done.
EXI TPLAY
MESSAGES 1/13
Graham Bell
232-555-0176
Jan. 10 12:03pm
PREV
NEXT
02:10
PLAY EX I T
Once you have entered your password, you do not have to enter it again while you are
reviewing messages. However, if you exit the messages or go to another feature, you
must enter your password again to access the Message Review screen.
You cannot use the Cordless Handset to access messages in Group Mailboxes. See
“Personal Message Playback” on page 144.