Installation guide

Synapse Installation Guide Back to Contents
System Configuration 88
2. Name the trunk that the door phone will use.
a. In the navigation menu at left, click System Settings, then Trunk Naming.
b. On the Trunk Naming page, select the trunk (PSTN Gateway port) for which you
enabled Door Phone Mode in Step 1.
c. Give this trunk a name such as “Door” or “Entry”. Because this name appears on
SB67030/031 Deskset screens, names should be four to six characters in length.
3. Click .
If you selected GW-1 (PSTN Gateway 1) in Step 1b, all Desksets that were assigned
the door phone line you selected in Step 1c now have the Line Appearance key for
that line assigned to answer door phone calls. On SB67030/031 Desksets, the Trunk
Name you assigned in Step 2 appears. If necessary, go to Step 4 to assign the door
phone line to a different key, or disable door phone line access for certain Desksets.
4. If necessary, assign the door phone trunk to an extension’s Programmable Feature
Key (PFK). You can assign this trunk to a single extension or multiple extensions,
thereby controlling which Deskset users can answer door phone calls.
a. In the navigation menu at left, click Extension Settings.
b. Select an extension, then click Feature Keys in the navigation menu at left.
c. Select the door phone trunk from the list for the desired PFK. If the door phone
trunk is already assigned to a PFK, select None to make it available to other PFKs
or to disable door phone functionality for the Deskset. SB67030/031 Deskset
PFKs are shown in Figure 46 on page 89 and SB67020 Deskset PFKs are shown
in Figure 47 on page 89.
d. Click .