Installation guide

Synapse Installation Guide Back to Contents
System Configuration 86
b. On the Trunk Naming page, select the trunk (PSTN Gateway port) for which you
enabled Door Phone Mode in Step 1.
c. Give this trunk a name such as “Door” or “Entry”.
3. Click .
4. Reserve the trunk that the door phone will use. Doing this will prevent other Desksets
from seizing the door phone line for outside calls.
a. In the navigation menu at left, click Trunk Reservation.
b. Select an extension to reserve the door phone trunk for outgoing calls. The
Deskset should then be disconnected from the network or used only for internal
calls.
c. In the Trunk Assigned list, select the trunk you named in Step 2.
d. Click .
5. Route the door phone trunk to the desired destination.
a. In the navigation menu at left, click Trunk Routing.