Installation guide

Synapse Installation Guide Back to Contents
Getting Started 75
3. Press to accept the changes and return to the Admin Settings menu.
Set/Edit Static IP
If your business requires a static IP address, contact your network administrator.
To set and edit static IP Address:
1. Access the Admin Settings menu: Press MENU, then press 3 on the dial pad, then
enter the Admin password, and press SELECT.
2. Press 3 on the dial pad to display the IP Settings screen.
3. Press 2. The Set/Edit Static IP screen appears.
4. Enter digits:
 There is a 12-digit limit on the number field (not including dots).
 On the SB67030/031 Deskset, press the pound key (#) to insert a dot.
On the SB67020 Deskset, press to insert a dot.
 Pressing when the cursor is positioned next to a dot deletes the dot
and the digit to the left of the dot.
5. Press
 or  to cycle through the four fields.
6. Press to accept the changes and return to the Admin Settings menu.
Quick
Dial
2. Set/Edit Static IP
Save
IP Settings
3. IP Status
1. IP Configuration Auto
Use or to move highlight.
Use or to cy cle through options.
IP Configuration
Set IP to: Auto
Save
030/031 Deskset IP Configuration
020 Deskset IP Configuration
Save
Quick
Dial
Save
Static IP Edit
IP Address:
Subnet Mask:
Gate w ay:
DNS Ser ve r:
Backspc
Use dial pad to enter digits and press #
to enter a dot.
Set/Edit Static IP
IP Address:
Subne t M as k :
Save Backspc"."
030/031 Deskset Set/Edit Static IP
020 Deskset Set/Edit Static IP
"."
Backspc
Save