Installation guide

Synapse Installation Guide Back to Contents
Getting Started 64
Press to return to the Main Menu.
Gateway Configuration
Press / in the Gateway Main menu until Configuration is highlighted,
as shown in Figure 36, and press to display the Configuration menu. The
current setting is indicated with [x].
Figure 36. Gateway Configuration
Configuration — Current Gateway settings.
 Auto IP — Is set automatically.
 Static IP — You can change the static IP only from the Gateway. See your
network administrator if you require details regarding IP assignments.
 Restore Defaults — Highlight Restore Defaults and press and hold for
two seconds when prompted to restore the Gateway to factory defaults.
 Upgrade Software — Highlight Upgrade Software and press . If new
software is available, you are prompted to press again to accept the
upgrade. You can use this interface or the WebUI to upgrade software.