Installation guide

Synapse Installation Guide Back to Contents
Installation 31
Gateway and ATA Placement
You can place the Gateway or ATA on a tabletop, mount it into a standard 19-inch metal
rack, or wall mount it. The PSTN Gateway must be installed within three feet of the
building ground point. Install each device using the following instructions.
Rack Mounting
To mount the Gateway or ATA into a standard 19-inch rack:
1. Remove the two mounting brackets and six screws from the packing tissue.
2. Position a bracket at the front of the device.
3. To align the screw holes, place the bracket on the device so that the locating indent
on the bracket matches the indent on the device.
4. Insert each of the three screws into the holes provided and tighten securely. Repeat
the process for the other bracket.
5. Position the chassis into the 19-inch metal rack.
Locating Indent