Installation guide

Synapse Installation Guide Back to Contents
Installation 11
System Installation Overview with Optional Analog Terminal Adapter
If you have analog devices that you want to attach to the system, you will need an AT&T
SB67050 Analog Terminal Adapter (ATA). The Synapse system supports one ATA per
system. The ATA allows you to attach hardware such as conference phones, overhead
paging equipment, a fax machine, or a source for Music On Hold (MoH) to Synapse.
Figure 3 illustrates a more complex installation (blue lines = telephone; red lines =
Ethernet; orange lines = audio), but there are different options for attaching some of the
equipment to the ATA.
Install the ATA after you have installed at least one Gateway and the Desksets.
Figure 3. Example of a System Featuring an ATA
ATA
PSTN Plug
Gateway
Local Area Network (LAN)
Deskset
Overhead
Paging
System
Music on Hold
Source
Analog Telephone/
Conference Phone/
Door Phone
Fax Machine