Installation guide

 For the Network-Based Locate Me feature (aka Sequential Ringing), the Answer
Confirmation option must be set to OFF. Sequential Ringing does not work if Answer
Confirmation is turned ON. Note: This is specific to Sequential ringing. Answer
Confirmation can be turned ON for the Simultaneous ringing feature.
3 Overview
This configuration guide assumes that your Synapse system is installed and that users are
able to make internal (Deskset to Deskset) calls. A Synapse System must include one of
more of the following devices:
 Desksets (SB67030/031 and/or SB67020/025 Desksets). The system supports up to
100 Desksets.
 Gateways. At least one Gateway must be installed. The system supports up to four
SB67010 PSTN Gateways, one SB67060 T1 Gateway, and one SB67070 SIP Gateway.
You can install any combination of Gateway models in a system, as long as you do not
exceed the supported number of each Gateway model.
For more information, see Figure 1: Sample Synapse System.
Figure 1: Sa
mple Synapse System
Page 4 of 16