Installation guide

Application Note
14
3. Set the Call Log/Messages Prefix according to your Dialing Rules. You can
enter a maximum of eight digits using only the characters 0–9, #, *, or P. Leave
the field blank if the Dialing Rules do not use a number for external line access.
4. Enter or modify Dialing Rule patterns. For more information, see “About Dialing
Rules” in the Synapse System Administrator’s Guide.
5. Select a Route for each Dialing Rule pattern as required. The list of routes
includes all available trunks in the system, as well as the Default Routing Priority.
6. Click Apply to save these settings.